dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Parking Brake Cable|Adjustments|Page 5796 > < Parking Brake Cable|Adjustments|Page 5794
Page 3
background image

5. Remove the intermediate parking brake cable from the cable connector attaching it to the right rear parking brake cable. Remove the locking nut

securing the intermediate cable housing to the side bracket on the frame rail.

6. If the vehicle is a short-wheel-base model, it will be necessary to loosen and lower the fuel tank far enough to remove the intermediate parking

brake cable.

7. Remove the intermediate parking brake cable from the side brackets and vehicle.

REMOVAL - PARKING BRAKE CABLE (RIGHT REAR) 

1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear tire and wheel assembly.
3. Remove rear brake drum from the rear wheel of the vehicle requiring service to the rear park brake cable.

4. Create slack in the rear parking brake cables by locking out the automatic adjuster as described here. Grasp an exposed section of front parking

brake cable near the equalizer and pull down on it. At this time install a pair of locking pliers on the cable just rearward of the second body
outrigger bracket.

Parking Brake Cable|Adjustments|Page 5796 > < Parking Brake Cable|Adjustments|Page 5794