Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Engine Mount: Service and Repair
Front Mount
FRONT MOUNT
REMOVAL
1. Support the engine and transmission assembly with a floor jack so it will not rotate.
Fig.92
2. Remove the front engine mount through bolt from the insulator and front crossmember mounting bracket (Fig. 92).
3. Remove six screws from air dam to allow access to the front mount screws.
4. Remove the front engine mount screws and remove the insulator assembly (Fig. 92).
5. Remove the front mounting bracket, if necessary (Fig. 92).
INSTALLATION
1. Install the front mounting bracket, if removed (Fig. 92).
2. Install the front engine mount through bolt from the insulator and front crossmember mounting bracket (Fig. 92).
3. Install the insulator assembly and mounting screws (Fig. 92).
