Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Fig.108
1. Clean sealing surfaces and apply a 1/8 inch bead of Mopar Engine RTV GEN II at the parting line of the chain case cover and the rear seal
retainer (Fig. 108).
2. Position a new pan gasket on oil pan (Fig. 107).
3. Install oil pan and tighten fasteners to 12 Nm (105 in. lbs.) (Fig. 107).
4. Install cover to transaxle case (Fig. 106).
5. Install the strut bolt to transaxle housing (Fig. 106). Tighten all bending brace bolts.
6. Install the drive belt splash shield.
7. Lower vehicle and install oil dipstick.
8. Connect negative cable to battery.
9. Fill crankcase with oil to proper level.
