Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Fig.38 Underbody Connections
16. Remove the tape or plugs from the suction line extension fitting and the underbody suction line fitting.
17. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the underbody suction line fitting.
18. Reconnect the suction line extension fitting to the underbody suction line fitting. Tighten the fittings to 23 Nm (17 ft. lbs.).
19. Install a new tie strap just forward of the connections between the underbody plumbing and the engine compartment plumbing for the rear heater
and air conditioner.
20. Lower the vehicle.
21. Evacuate the refrigerant system.
22. Charge the refrigerant system.
