dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C - Compressor Failure|Page 7534 > < A/C - Compressor Failure|Page 7532
Page 9
background image

36.

Using a tape measure, measure down from the top (port side) of the receiver/drier 120.6 mm (4.75 in.) and mark the receiver/drier as shown in
(Fig. 6).

37.

Using a hacksaw, cut the outside circumference of the receiver/drier case.

38.

Inspect inside the receiver/drier for the presence of desiccant powder. Desiccant in this section of the receiver/drier is an indication that desiccant
has been released into the A/C system (Fig. 7).

39.

If desiccant has been released into the A/C system, continue with Section B - "Removing Desiccant Contamination from the A/C System". If
desiccant has not been released into the A/C system, continue with Section C - "Compressor Installation".

Repair Procedure B

Removing Desiccant Contamination from the A/C System.

A/C - Compressor Failure|Page 7534 > < A/C - Compressor Failure|Page 7532