dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blower Motor Relay|Testing and Inspection > < Blower Motor Relay|Locations|Page 7615
Page 3
background image

module (automatic heater-A/C control) through a fuse in the IPM on the fused rear blower motor relay output circuit only when the blower
motor relay coil is energized.

-

The normally closed terminal (87A) is not connected to any circuit in this application, but provides a battery current output only when the 
blower motor relay coil is de-energized.

Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures,
further details on wire harness routing and retention, as well as pin-out and location views for the various wire harness connectors, splices, and
grounds.

Blower Motor Relay|Testing and Inspection > < Blower Motor Relay|Locations|Page 7615