Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Compressor Clutch Relay: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Unlatch and remove the cover from the Intelligent Power Module (IPM).
3. See the fuse and relay layout map molded into the inner surface of the IPM cover for compressor clutch relay identification and location.
4. Remove the compressor clutch relay from the IPM by pulling it straight up.
INSTALLATION
1. See the fuse and relay layout map molded into the inner surface of the Intelligent Power Module (IPM) cover for compressor clutch relay
identification and location.
2. Position the compressor clutch relay to the proper receptacle in the IPM.
3. Align the compressor clutch relay terminals with the terminal cavities in the IPM relay receptacle.
4. Push down firmly on the compressor clutch relay until the terminals are fully seated in the terminal cavities in the IPM receptacle
5. Install and latch the cover onto the IPM
6. Reconnect the battery negative cable.
