Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Turn Signal Switch: Service and Repair
REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove upper and lower steering column shrouds. Refer to Steering, Column, Shroud, REMOVAL.
3. Disconnect wire connector from back of multi-function switch.
4. Remove screws holding multi-function switch to steering column adapter collar.
5. Remove the multi-function switch.
INSTALLATION
1. Position the switch on to the steering column.
2. Install the two retaining screws.
3. Connect the wire harness connector.
4. Install the upper and lower steering column shrouds. Refer to Steering, Column, Shroud, INSTALLATION.
5. Connect the battery negative cable.
