Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Fuel Pump Pickup Filter: Service and Repair
INLET FILTER
REMOVAL
1. Remove fuel pump module.
Fig. 22 Inlet
2. Using a thin straight blade screwdriver, pry back the locking tabs on fuel pump reservoir and remove the strainer (Fig. 22).
3. Remove strainer O-ring from the fuel pump reservoir body.
4. Remove any contaminants in the fuel tank by washing the inside of the fuel tank.
INSTALLATION
1. Lubricate the strainer O-ring with clean engine oil.
2. Insert strainer O-ring into outlet of strainer so that it sits evenly on the step inside the outlet.
3. Push strainer onto the inlet of the fuel pump reservoir body. Make sure the locking tabs on the reservoir body lock over the locking tangs on the
strainer.
4. Install fuel pump module.
