Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
1.
Using pliers, remove both tension clamps from the heater core return hose (top hose to heater core) (Fig. 1).
2.
Remove and discard the heater core return hose and restrictor.
3.
Install the new restrictor into the coolant tube as shown in (Fig. 2)
4.
Install the tension clamps to the new heater core return hose.
5.
Install and fully seat the heater core return hose onto the coolant tube and the heater core outlet tube. Install the tension clamps.
6.
Fill the coolant recovery/reserve container to the full level using a 50/50 mix of Mopar coolant (p/n 05066386AA) and distilled water.
7.
Start the engine and check for coolant leaks.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
