Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
8. Remove pressure hose routing bracket bolt at engine. Bolt can be accessed through hole in cradle crossmember.
9. Disconnect pressure hose tube nut at power steering pump.
10. Remove power steering fluid pressure hose from vehicle.
INSTALLATION
1. Remove any used O-rings from ends of power steering hose.
2. Using a lint free towel, wipe clean hose ends, power steering pump pressure outlet fitting and steering gear port.
3. Install new O-rings on ends of power steering fluid pressure hose. Lubricate O-rings using clean power steering fluid.
CAUTION: Use care not to bend tube ends of the power steering hoses when installing. Leaks and restrictions may occur.
CAUTION: Power steering fluid hoses must remain away from the exhaust system and must not come in contact with any unfriendly surfaces on
the vehicle.
4. Route hose up behind engine toward pump avoiding tight bends or kinking.
