dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tire Pressure Sensor|Service and Repair > < Electrical System - Revisions|Page 1916
Page 1
background image

Tire Pressure Sensor: Testing and Inspection

DIAGNOSIS AND TESTING - TIRE PRESSURE SENSOR

NOTE:  Tire pressure may increase from 2 - 6 psi (14 - 41 kPa) during normal driving conditions. Do NOT reduce this normal pressure build up.

If a fault in the system is detected, always check air pressure in the tires first with a known accurate air gauge and correct the inflation pressure. If any
tire is low, inspect all tires.

If gauge-read pressure in the tires does not reflect the reading on the EVIC, retrain the sensors, then reevaluate. Refer to the appropriate diagnostic
information for complete diagnosis of the Tire Pressure Monitoring System.

Tire Pressure Sensor|Service and Repair > < Electrical System - Revisions|Page 1916