Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
1. Snap the left side of the Integrated Power Module (IPM) housing in its mounting bracket and connect the various electrical connectors. Care must
be taken that the Connector Positive Assurance (CPA) on the five-pin B+ connector is positively engaged to prevent generating a Diagnostic
Trouble Code (DTC).
NOTE: IPM electrical connectors are color coded to ease location reference.
2. Being certain no wires are stressed or pinched, rotate the IPM clock-wise until secured in mounting bracket. An audible click may be heard.
3. Install the battery in the vehicle. Refer to the Battery section for the procedure.
4. Install the battery thermal guard in the vehicle. Refer to the Battery section for the procedure.
5. Connect the negative and positive battery cables.
6. Using a diagnostic scan tool, check for any stored diagnostic trouble codes and correct, check that all vehicle options are operational before
returning the vehicle to service.
