dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

08-019-02A > < Electrical - Erroneous Horn/Lamp Activation While Parked|Page 3183
Page 3
background image

10.

Connect the DRBIII(R) to the vehicle.

11.

Download the flash from the DRBIII(R) to the vehicle. Using the DRBIII(R) select:

a.

"Vehicle Flash"

b.

Follow the directions on the DRBIII® screen.

NOTE:

Due to the FCM programming procedure, a DTC may be set in other modules (TCM, PCM, MIC, SKIM, etc.) within the vehicle, if so equipped.
Some DTC's may cause the MIL to illuminate. Check all modules using "Module Scan", record the DTC's, and erase these DTC's prior to returning
the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

08-019-02A > < Electrical - Erroneous Horn/Lamp Activation While Parked|Page 3183