dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Technician Safety Information|Page 3610 > < Diagram Information and Instructions|Page 3607
Page 1
background image

Body Control Module: Technician Safety Information

WARNING:  ENGINES PRODUCE CARBON MONOXIDE THAT IS ODORLESS, CAUSES SLOWER REACTION TIME, AND CAN
LEAD TO SERIOUS INJURY. WHEN THE ENGINE IS OPERATING, KEEP SERVICE AREAS WELL VENTILATED OR ATTACH
THE VEHICLE EXHAUST SYSTEM TO THE SHOP EXHAUST REMOVAL SYSTEM.

Set the parking brake and block the wheel before testing or repairing the vehicle. It is especially important to block the wheels on front-wheel drive
vehicles; the parking brake does not hold drive wheels.

When servicing a vehicle, always wear eye protection, and remove any metal jewelry such as rings, watchbands or bracelets that might make an
inadvertent electrical contact.

When diagnosing a body system problem, it is important to follow approved procedures where applicable. These procedures can be found in this
General Information Section. Following these procedures is very important to safety of individuals performing diagnostic tests.

SERVICING SUB-ASSEMBLIES

Some components of the body system are intended to be serviced as an assembly only. Attempting to remove or repair certain system sub-components
may result in personal injury and/or improper system operation. Only those components with approved repair and installation procedures in the service
manual should be serviced.

Technician Safety Information|Page 3610 > < Diagram Information and Instructions|Page 3607