dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

18-026-02A > < Emissions - MIL ON/Erroneous DTC P0456 (EVAP)|Page 3695
Page 3
background image

EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

1.

**Replace the PCM. Refer to the service information available in TechCONNECT or the appropriate service manual in Section 8E, Electronic
Control Modules. **

NOTE:

The following is required by law.

2.

Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label. (Fig. 1)

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

18-026-02A > < Emissions - MIL ON/Erroneous DTC P0456 (EVAP)|Page 3695