Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Visually inspect the catalytic converter element by using a borescope or equivalent. Remove both oxygen sensors and insert borescope. If borescope is
not available, remove converter and inspect element using a flashlight. Inspect element for cracked or melted substrate.
NOTE: Before replacing a catalytic converter, determine the root cause of failure. Most catalytic converter failures are caused by air, fuel or ignition
problems.
INSTALLATION
1. Position new gasket onto the manifold flange and install catalytic converter. Tighten fasteners to 37 Nm (325 inch lbs.).
NOTE: Be careful not to twist or kink the oxygen sensor wires.
2. Install (if removed) and connect the downstream oxygen sensor.
3. Install the muffler/resonator assembly.
