Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Canister Purge Solenoid: Service and Repair
Fig. 3 EVAP Purge Solenoid
REMOVAL
The solenoid attaches to a bracket near the radiator on the passenger side of vehicle. The solenoid will not operate unless it is installed correctly.
1. Disconnect electrical connector from solenoid.
2. Disconnect vacuum tubes from solenoid.
3. Remove solenoid from bracket.
INSTALLATION
The solenoid attaches to a bracket near the radiator on the passenger side of vehicle. The solenoid will not operate unless it is installed correctly.
The top of the solenoid has TOP printed on it. The solenoid will not operate unless it is installed correctly.
1. Install solenoid on bracket.
2. Connect vacuum tube to solenoid.
3. Connect electrical connector to solenoid.
