Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Fuel Injector: Description and Operation
Fig. 9 Fuel Injector Location - Typical
The injectors are positioned in the intake manifold or cylinder head with the nozzle ends directly above the intake valve port (Fig. 9).
Fig. 10 Fuel Injector - Typical
The fuel injectors are 12 volt electrical solenoids (Fig. 10). The injector contains a pintle that closes off an orifice at the nozzle end. When electric
current is supplied to the injector, the armature and needle move a short distance against a spring, allowing fuel to flow out the orifice. Because the fuel
is under high pressure, a fine spray is developed in the shape of a hollow cone or two streams. The spraying action atomizes the fuel, adding it to the air
entering the combustion chamber. Fuel injectors are not interchangeable between engines.
The PCM provides battery voltage to each injector through the ASD relay. Injector operation is controlled by a ground path provided for each injector by
the PCM. Injector on-time (pulse-width) is variable, and is determined by the PCM processing all the data previously discussed to obtain the optimum
injector pulse width for each operating condition. The pulse width is controlled by the duration of the ground path provided.
