dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pump > < Fuel Pressure Regulator|Description and Operation
Page 1
background image

Fuel Pressure Regulator: Service and Repair

Fig. 9 Fuel Pressure Regulator O-rings

REMOVAL

The fuel pressure regulator is part of the fuel pump module (Fig. 9). Remove the fuel pump module from the fuel tank to access the fuel pressure
regulator. Refer to the Fuel Pump Module.  See: Fuel Pump/Service and Repair
1. Spread tangs on pressure regulator retainer.
2. Pry fuel pressure regulator out of housing.
3. Ensure both upper and lower O-rings were removed with regulator.

INSTALLATION

The fuel pressure regulator is part of the fuel pump module. Remove the fuel pump module from the fuel tank to access the fuel pressure regulator.
1. Lightly lubricate the O-rings with clean engine oil and place them into opening in pump module (Fig. 9).
2. Push regulator into opening in pump module.
3. Fold tangs on regulator retainer over tabs on housing.

Fuel Pump > < Fuel Pressure Regulator|Description and Operation