dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel System - Throttle Body Cleaning Procedure|Page 4196 > < Throttle Position Sensor|Locations|Page 4187
Page 1
background image

Throttle Body: Customer Interest
Fuel System - Throttle Body Cleaning Procedure

NUMBER: 14-002-07

GROUP: Fuel System

DATE: April 5, 2007

SUBJECT:
Throttle Body Service

OVERVIEW:
This bulletin involves a cleaning procedure for the mechanical throttle body.

MODELS:

2004 - 2006

CS

Pacifica

2001

- 2007

RG

Chrysler Town & Country/Dodge Caravan
(International Markets)

2001 - 2007

RS

Chrysler Town & Country/Dodge Caravan

NOTE:

This bulletin applies to CS models with a 3.5 or 3.8L engine, (sales codes EGN & EGH respectively) and RS/RG models with a 3.3 or 3.8 engine,
(sales codes EGA, EGM or EGH).

SYMPTOM/CONDITION:

The throttle plate and bore may become coated with contaminates from the intake system.

DIAGNOSIS:

If the throttle body plate and bore are coated with contaminates, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:

1.

Remove the throttle body from the engine; Refer to the detailed removal procedures available in DealerCONNECT > Service > Repair >
TechCONNECT > 14 - FUEL SYSTEM > FUEL INJECTION > THROTTLE BODY > REMOVAL

2.

Spray the entire throttle body bore and both sides of the throttle plate with Mopar Throttle Body Cleaner, p/n 04897156AA. This will remove the
bulk of the contaminant.

CAUTION:

This cleaner should only be used in a well ventilated area. Do not allow contact with skin or eyes. Rubber or butyl gloves and safety glasses are
recommended. Wash thoroughly after use. Do not ingest.

NOTE:

Use only Mopar Throttle Body Cleaner, the use of other cleaning agents may damage components of the throttle body.

Fuel System - Throttle Body Cleaning Procedure|Page 4196 > < Throttle Position Sensor|Locations|Page 4187