Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Throttle Position Sensor: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the electrical connector from the Inlet Air Temperature sensor.
3. Remove the air cleaner box lid. Remove hose from throttle body.
4. Disconnect the electrical connector at TPS.
5. Disconnect the electrical connector at IAC.
6. Remove the throttle and speed control cables from throttle body.
7. Remove 3 mounting bolts from throttle body.
8. Remove throttle body
9. Disconnect the purge vacuum line from the throttle body.
10. Remove TPS from throttle body.
INSTALLATION
1. Install TPS to throttle body.
2. Disconnect the purge vacuum line from the throttle body.
3. Install throttle body.
4. Install 3 mounting bolts from throttle body Tighten bolts.
5. Install the throttle and speed control cables to throttle body.
6. Connect the electrical connector at TPS.
7. Connect the electrical connector at IAC.
8. Install the air cleaner box lid. Install hose to throttle body.
9. Install the electrical connector to the Inlet Air Temperature sensor.
10. Connect the negative battery cable.
