dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body Control Module|Description and Operation > < Technician Safety Information
Page 1
background image

Body Control Module: Vehicle Damage Warnings

Before disconnecting any control module, make sure the ignition is "off". Failure to do so could damage the module.

When testing voltage or continuity at any control module, use the terminal side (not the wire end) of the connector. Do not probe a wire through the
insulation; this will damage it and eventually cause it to fail because of corrosion. Be careful when performing electrical tests so as to prevent accidental
shorting of terminals. Such mistakes can damage fuses or components. Also, a second code could be set, making diagnosis of the original problem more
difficult.

CAUTION: (Diesel Only)  Do not actuate the DCHA Field Mode Test with the engine OFF. Failure to follow these instructions may result in internal
damage to the DCHA Heater Module.

Body Control Module|Description and Operation > < Technician Safety Information