dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Programming the Powertrain Control Module|Page 2908 > < Programming the Powertrain Control Module
Page 1
background image

Engine Control Module: Service and Repair
Powertrain Control Module Replacement

REMOVAL

1. Disconnect the negative battery cable.
2. Remove the battery shield, refer to the Battery section for more information.

Fig.12 PCM

3. Remove the 2 upper PCM bracket bolts.
4. Remove the 2 PCM connectors.
5. Remove the headlamp, refer to the Lamps section for more information.

Fig.13 PCM Lower Bolt

6. Remove the lower PCM mounting bolt.
7. Remove PCM.

Programming the Powertrain Control Module|Page 2908 > < Programming the Powertrain Control Module