dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Pedal Positioning Switch|Specifications|Page 788 > < Pedal Positioning Switch|Specifications|Page 786
Page 1
background image

Pedal Positioning Switch: Service and Repair

ADJUSTABLE PEDAL SWITCH 

REMOVAL 

NOTE:  Before proceeding, review all Steering Column and Airbag Warnings and Cautions. 

1. Remove battery ground cable terminal from battery negative post and isolate.
2. Under instrument panel, remove silencer panel below lower steering column cover.

3. Remove screws securing lower steering column cover/knee blocker, then remove it.
4. Disconnect parking brake release link at release handle.
5. Compress tabs on sides of data link diagnostic connector and remove it from knee blocker reinforcement plate.
6. Remove screws securing knee blocker reinforcement plate in place, then remove reinforcement plate.

7. Remove screws fastening upper and lower steering column shrouds to steering column.

Pedal Positioning Switch|Specifications|Page 788 > < Pedal Positioning Switch|Specifications|Page 786