Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Power Door Lock Switch: Testing and Inspection
1. Remove door trim panel. Refer to Body Door - Front, Trim Panel, REMOVAL and INSTALLATION.
2. Disconnect wire connector from back of door lock switch.
3. Depress switch to LOCK position.
Door Lock Switch Continuity
Fig.2 Door Lock Switch
4. Using an ohmmeter, test switch resistance between Pins 2 and 3. Refer to the DOOR LOCK SWITCH CONTINUITY test and.
5. Depress switch to UNLOCK position.
6. Test resistance between Pins 2 and 3.
7. Test resistance between pins 2 and 3 while switch is in its normal unactuated mode.
8. If resistance values are not within the parameters shown replace the door lock switch.
