dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Seat Motor Position Sensor > < Power Mirror Replacement
Page 1
background image

Power Mirror Switch: Service and Repair
Power Foldaway Mirror Switch - Export Replacement

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the upper and lower steering column shroud.
3. Disconnect electrical harness connector.

Fig.4 Power Folding Mirror Switch

4. Remove switch from steering column shroud.

INSTALLATION

1. Install switch to steering column shroud.
2. Connect wire harness connector.
3. Install the upper and lower steering column shroud.
4. Connect the battery negative cable.

Power Seat Motor Position Sensor > < Power Mirror Replacement