dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wheel Speed Sensor > < Traction Control Switch|Locations|Page 918
Page 1
background image

Traction Control Switch: Testing and Inspection

DIAGNOSIS AND TESTING - TRACTION CONTROL SWITCH 

1. Remove lower column shroud.
2. Disconnect traction control switch harness from column harness below column.

3. Using an ohmmeter, check for continuity reading between pins. Refer to TRACTION CONTROL SWITCH CONTINUITY test table and.

TRACTION CONTROL SWITCH CONTINUITY 

Wheel Speed Sensor > < Traction Control Switch|Locations|Page 918