dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Neutral Safety Switch > < Key/Lock Cylinder|Page 5979
Page 7
background image

each side of the column) and retaining clips.

15. Install the lower steering column shroud on the steering column. Install and securely tighten the center screw attaching the lower shroud to the tilt

head on the column (Fig. 20).

16. Install the upper steering column shroud over the tilt head of the steering column snapping it into place on the lower shroud. Install and securely

tighten the 2 remaining screws attaching the upper shroud to the lower shroud (Fig. 20).

17. Install the steering column cover liner on the instrument panel below the steering column (Fig. 19). Install and securely tighten the 10 bolts

attaching the steering column cover liner to the instrument panel.

18. Install the parking brake pedal release cable on the parking brake release lever in the lower steering column cover (Fig. 18).
19. Install the lower steering column trim cover on the instrument panel below the steering column. Install and securely the screws attaching the lower

steering column cover to the instrument panel (Fig. 17).

20. Connect the negative (ground) cable on the battery terminal.

Neutral Safety Switch > < Key/Lock Cylinder|Page 5979