dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering - Steering Column Knocking Noises|Page 6722 > < Steering - Steering Column Knocking Noises
Page 2
background image

5. Remove the two fasteners securing the lower column mounting bracket (Fig. 1).

6. Using Miller Tool # 6831A, remove the roll pin securing the coupler to the lower steering shaft (Fig 2).

7. Slide the coupler off of the lower steering shaft.

8. Install the interference ring, p/n 05135259AA, over the notch in the lower steering shaft using the locating rib to align the interference ring in the

correct position.

Steering - Steering Column Knocking Noises|Page 6722 > < Steering - Steering Column Knocking Noises