dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Electrical System - Revisions|Page 6967 > < Electrical System - Revisions|Page 6965
Page 1
background image

Tire Pressure Sensor: Description and Operation

DESCRIPTION

On vehicles equipped with Tire Pressure Monitoring, one tire pressure sensor is mounted to each wheel. Each sensor has an internal battery that lasts up
to 10 years. The battery is not serviceable. At the time of battery failure, the sensor must be replaced. The serviceable components of the tire pressure
sensor are:

-

Sensor-To-Wheel Grommet

-

Valve Stem Cap

-

Valve Stem Core

Valve stem caps and cores are specifically designed for the tire pressure monitoring sensors. Although similar to standard valve stem caps and cores,
they are different.

CAUTION:  Do not use a standard valve stem cap or core in a tire pressure sensor. Always use the original equipment style sensor cap and core.

CAUTION:  Do not reuse the Sensor-To Wheel Grommet. Always use a new grommet when installing a pressure sensor and properly torque the sensor
nut.

CAUTION:  Do not try to install a tire pressure sensor in a steel wheel or aftermarket wheel. Use only in original style factory wheels.

OPERATION 
Tire pressure sensors are battery operated. They transmit tire pressure data once every minute at speeds above 20 mph (32 km/h) or up to once every
hour when stationary (parked). 

Electrical System - Revisions|Page 6967 > < Electrical System - Revisions|Page 6965