dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Control System Relay, A/T > < Torque Converter Clutch Solenoid, A/T|Diagrams|Page 5063
Page 1
background image

Torque Converter Clutch Solenoid: Service and Repair

31TH - Automatic Transmission
Torque Converter Clutch (TCC) Solenoid

REMOVAL 

1. Remove valve body from transaxle. 

2. Remove three (3) torque converter clutch solenoid-to-valve body screws (Fig. 223).
3. Remove torque converter clutch solenoid (Fig. 223). Note orientation of plug and spring.

INSTALLATION 

1. Install plug and spring as shown in (Fig. 223).
2. Install torque converter clutch solenoid to valve body (Fig. 223) and torque screws to 5 Nm (45 inch lbs.). 
3. Install valve body to transaxle. 

Transmission Control System Relay, A/T > < Torque Converter Clutch Solenoid, A/T|Diagrams|Page 5063