Grand Caravan FWD V6-3.3L VIN 3 Flex Fuel (2002)
Headlamp Washer Hose: Service and Repair
REMOVAL
The headlamp washer hose is a special high pressure hose with specific fittings, and must be replaced as a unit.
1. Disconnect and isolate the battery negative cable.
2. Hoist vehicle or support on jack stands.
3. Remove parts as necessary to replace high pressure headlamp washer hose. When disconnecting hose, press down firmly on latch at headlamp
washer pump motor and telescopic washer assembly and pull apart.
INSTALLATION
The headlamp washer hose is a special high pressure hose with specific fittings, and must be replaced as a unit.
1. Install the new high pressure headlamp washer hose assembly Push fitting on until a snap is heard.
2. Install the parts that were removed to replace high pressure headlamp washer hose.
3. Remove vehicle from hoist or jack stands.
4. Connect the battery negative cable.
5. Verify vehicle and system operation.
