dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Windshield Washer Motor > < Washer Fluid Level Switch|Diagrams|Page 10436
Page 1
background image

Windshield Washer Hose: Service and Repair

REMOVAL

1. Remove washer reservoir from vehicle (Refer to ELECTRICAL/WIPERS/WASHERS/WASHER RESERVOIR - REMOVAL).
2. Disconnect washer hose front the reservoir cavity.
3. Disconnect the washer hose from the reservoir pump.
4. Remove parts as necessary to replace washer hose (engine compartment, interior components, etc....).

INSTALLATION

1. Install parts as necessary to after replacing washer hose (engine compartment, interior components, etc....).
2. Connect the washer hose to the reservoir pump.
3. Connect washer hose to the reservoir cavity
4. Install the washer reservoir into vehicle (Refer to ELECTRICAL/WIPERS/WASHERS/WASHER RESERVOIR - INSTALLATION).

Windshield Washer Motor > < Washer Fluid Level Switch|Diagrams|Page 10436