Grand Caravan FWD V6-3.3L VIN R (1999)
Power Seat Motor: Testing and Inspection
1. Remove power seat switch. Refer to Seat Switch Replacement.
2. Disconnect wire connector.
3. Using a voltmeter check for battery voltage at Pin 5. Using an ohmmeter, check Pin 1 for ground.
Seat Motor Test
4. To test the seat motors, verify proper seat responses. Using two jumper wires, connect one to a battery supply and the other to a ground. Connect
the other ends to the seat wire harness connector as described. If any motor fails to operate, check wire connectors to the motor. If not OK, repair
as necessary If OK, replace power seat adjuster. Refer to Power Seat Adjuster Replacement.
