Grand Caravan FWD V6-3.3L VIN R (1999)
Strut Clevis Bracket Bolt Hole Grinding Area
CAUTION: When slotting the bottom mounting hole on the strut clevis bracket, do not enlarge the hole beyond the indentations on the sides of the
strut clevis bracket.
4. Using an appropriate grinder and grinding wheel, slot the bottom hole in both sides of the strut clevis bracket.
CAUTION: After slotting the strut clevis bracket hole, do not install the original attaching bolts when assembling the steering knuckle to the strut
assembly. Only the flange bolts, cam bolts, and dog bone washers from the service package must be used to attach the steering knuckle to the strut
after the mounting hole is slotted.
Package Bolts Correctly Installed (left Shown)
5. Position the knuckle back into the strut clevis bracket. Install a flanged bolt from the service package into the upper mounting hole. Install a cam
bolt into the bottom mounting hole. Both bolts should point forward once installed.
