Grand Caravan FWD V6-3.8L VIN L (2001)
Sliding Door Latch: Service and Repair
LATCH / LOCK ASSEMBLY
REMOVAL
1. Remove sliding door trim panel.
2. Remove sliding door stop bumper.
3. Peel watershield away from adhesive around perimeter of inner door panel.
Fig. 4
4. Disengage external cable from latch/lock assembly (Fig. 4).
5. Remove foam block.
6. Remove inside door handle assembly.
7. Disengage inside cable from latch/lock assembly.
8. Disengage link from bellcrank.
9. Disengage hold open latch cable from lower hinge.
Fig. 5
10. Remove bolts attaching latch/lock control to sliding door (Fig. 5).
11. If equipped, lower latch and disconnect wire connector from power door lock motor.
