Grand Caravan FWD V6-3.8L VIN L (2001)
Transmission Control Module: Service and Repair
Transmission Control Module Replacement
REMOVAL
NOTE: If transmission control module is being replaced with a new or replacement unit, the Pinion Factor and Quick Learn procedures must be
performed. (Refer to TRANSMISSION CONTROL MODULE - STANDARD PROCEDURE). If vehicle has less than 1500 miles, the Torque
Converter Clutch (TCC) Break-In Strategy reset procedure must also be performed. (Refer to TRANSMISSION CONTROL MODULE -
STANDARD PROCEDURE).
1. Disconnect battery negative cable.
2. Raise vehicle on hoist.
3. Remove left front tire/wheel assembly.
4. Pull back splash shield to gain access to TCM location.
Fig.15 Transmission Control Module 60-way Connector
5. Disconnect TCM 60-way connector (Fig. 15).
Fig.16 Transmission Control Module Removal/Installation
