dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Sliding Door Key Cylinder Link Replacement|Page 7970 > < Recall - Sliding Door Key Cylinder Link Replacement
Page 2
background image

Vehicle Not Available

If a vehicle is not available for service, let us know by filling out the pre-addressed Owner Notification Form or describe the reason on a postcard and
mail to:

DaimlerChrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757

Additional Information

If you have any questions or need assistance in completing this action, please contact your Zone Service Office.

Service Procedure

1.

Remove the left sliding door upper frame molding (Figure 1).

2.

For the LEFT door only: Remove the screw from the inside of the ash receiver bezel.

3.

Disengage the push-in fasteners from around the perimeter of the trim panel and then remove the trim panel (Figure 1).

Recall - Sliding Door Key Cylinder Link Replacement|Page 7970 > < Recall - Sliding Door Key Cylinder Link Replacement