Grand Caravan FWD V6-3.8L VIN L (2001)
b.
Route the module wiring along the left side of the seat and insert the harness clip into the seat pan (Figure 9).
c.
Tie strap the wiring harness to the loop in the seat frame (Figure 9).
NOTE:
The seat cushion wires must be routed on the inside of the seat back hinge.
33.
Mount the seat heater module to the metal seat pan using the supplied push pin as shown in Figure 10.
34.
Using the supplied tie strap, secure the wiring harness near the seat heater module to the seat cross bar (Figure 10).