Grand Caravan FWD V6-38L VIN L (2001) Engine | Intake Manifold Repair
WARNING: INTAKE MANIFOLD GASKET IS MADE OF VERY THIN METAL AND MAY CAUSE PERSONAL INJURY,
HANDLE WITH CARE.
12. Remove intake manifold seal retainers screws (Fig. 137). Remove intake manifold gasket.
13. Inspect and clean manifold.
CLEANING
1. Discard gasket(s).
2. Clean all sealing surfaces.
INSPECTION
Check for:
-
Damage and cracks of each section.
-
Clogged water passages in end cross-overs (if equipped).
-
Check for cylinder head mounting surface distortion using a straightedge and thickness gauge.
INSTALLATION
1. Place a bead (approximately 1/4 inch diameter) of Mopar Engine RTV GEN II onto each of the four manifold to cylinder head gasket comers (Fig.
138).