Grand Caravan FWD V6-3.8L VIN L (2001)
3. Install the brake rotor on the hub and bearing.
4. Install brake caliper and adapter assembly back over brake rotor and align with mounting holes on steering knuckle. Install the mounting bolts and
tighten to 169 Nm (125 ft. lbs.) torque.
5. Install the hub nut on the end of the stub axle. With aid of a helper applying the brakes to keep the front hub from turning, tighten the hub nut to
Install the mounting bolts and tighten to 244 Nm (180 ft. lbs.) torque.
6. Install wheel and tire assembly on vehicle. Tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half specification.
Then repeat the tightening sequence to the full specified torque of 135 Nm (100 ft. lbs.).
7. Lower vehicle to the ground.
8. Check the front wheel alignment toe setting and reset if not within specifications.
