dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 2855 > < Diagram Information and Instructions|Page 2853
Page 6
background image

When the PCM senses a wide-open-throttle condition through the Throttle Position Sensor (TPS) it deenergizes the A/C compressor clutch relay.
This disables the air conditioning system.

The PCM does not monitor the heated oxygen sensor inputs during wide-open-throttle operation except for downstream heated oxygen sensor and
both shorted diagnostics. The PCM adjusts injector pulse width to supply a predetermined amount of additional fuel.

Ignition Switch OFF Mode

When the operator turns the ignition switch to the OFF position, the following occurs:
-

All outputs are turned OFF, unless O2 Heater Monitor test is being run. Refer to the Emission for On-Board Diagnostics.

-

No inputs are monitored except for the heated oxygen sensors. The PCM monitors the heating elements in the oxygen sensors and then shuts
down.

Diagram Information and Instructions|Page 2855 > < Diagram Information and Instructions|Page 2853