Grand Caravan FWD V6-3.8L VIN L (2001)
3. Remove lower anchor shoulder-nut.
4. Remove lower anchor from wheelhouse.
5. Fold upper turning loop extension cover downward to gain access to anchor bolt.
6. Remove bolt attaching turning loop to extension bracket above quarter glass.
7. Remove turning loop from extension bracket.
8. Remove D-pillar trim panel.
9. Remove quarter trim bolster.
10. Remove quarter trim panel as necessary to gain access to HVAC unit.
11. Route seat belt webbing and turning loop through access hole in quarter trim.
12. Loosen HVAC unit enough to gain access to seat belt retractor fasteners.
Fig.6 Trim Panel Mounting Bracket
a. Remove bracket around HVAC unit.
Fig.7 Lower Heater Duct
b. Remove air duct.
