dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sensors and Switches - Lighting and Horns > < Door Switch|Locations|Page 818
Page 1
background image

Door Switch: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove instrument panel lower cover.
3. From behind headlamp switch assembly, depress retaining tabs and push switch from instrument panel.
4. Disconnect wire connector from power mirror switch.
5. Disengage lock tabs above and below the mirror switch.
6. Remove power mirror switch from headlamp switch bezel.

INSTALLATION

1. Install power mirror switch to the headlamp switch bezel.
2. Connect wire connector to the power mirror switch.
3. Insert headlamp switch assembly into instrument panel.
4. Install instrument panel lower cover.
5. Connect battery negative cable.

Sensors and Switches - Lighting and Horns > < Door Switch|Locations|Page 818