Grand Caravan FWD V6-3.8L VIN L (2001)
Fig.8 Starter
7. Remove starter from bellhousing (Fig. 8).
8. Separate starter spacer from transaxle bell-housing.
INSTALLATION
1. Place starter spacer in position on transaxle bellhousing, flange toward flywheel.
2. Place starter in position on bellhousing.
3. Install bolts and ground wire (Fig. 5) to hold starter to transaxle bellhousing.
4. Connect solenoid connector into starter.
5. Install nut to hold B+ terminal to starter solenoid.
6. Lower vehicle.
7. Connect battery negative cable.
8. Verify starter operation.
