Intrepid V6-2.7L VIN R (2003)
Front Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove door trim panel.
2. Remove water shield as necessary.
3. Remove door glass.
4. Disengage clips holding latch release link and lock link to door at latch.
5. Disconnect links from latch.
Fig. 5
6. Remove screws attaching handle to door through access hole in door inner pane (Fig. 5).
7. Remove door handle from door.
INSTALLATION
1. Place door handle in position on door.
2. Install screws attaching to handle to door.
3. Insert links into clips on latch.
4. Engage clips attaching latch release link and lock link to door latch.
5. Verify door latch handle operation.
6. Install door glass.
7. Install water shield.
8. Install door trim panel.