Intrepid V6-2.7L VIN R (2003)
Rear Door Hinge: Service and Repair
HINGE
REMOVAL
1. Mark outline of hinge on B-pillar and door end frame.
2. Remove nut and bolt attaching hinge to B-pillar. Refer to Rear Door Removal procedure.
Fig. 5
3. Remove nut and bolt attaching hinge to door end frame (Fig. 5).
4. Remove hinge from door.
INSTALLATION
1. Align hinge to marks on door end frame.
2. Place hinge in position on door.
3. Install nut and bolt attaching hinge to door end frame.
4. Align hinge to marks on B-pillar.
5. Install nut and bolt attaching hinge to B-pillar.
6. Verify door alignment and operation, adjust as necessary.
