Intrepid V6-2.7L VIN R (2003)
(1) Set park brake and place gear selector in neutral.
(2) Remove instrument panel center bezel. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair
(3) Loosen set screw attaching gear shift knob to gear shift.
(4) Remove gear shift knob from gear shift.
(5) Disengage clips attaching bezel to floor console.
(6) Disconnect the power outlet, if equipped.
(7) Disconnect the transmission range indicator illumination connector.
(8) Remove bezel from vehicle.
Installation
(1) Connect the transmission range indicator illumination connector.
(2) Connect power outlet, if equipped.
(3) Place bezel in position on vehicle.
(4) Engage clips attaching bezel to floor console.
(5) Install instrument panel center bezel. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair
(6) Push gear shift knob onto gear shift.
(7) Tighten set screw attaching gear shift knob to gear shift.
Floor (Center) Console - Remove/Install
Floor Console
