Intrepid V6-2.7L VIN R (2003)
Brake Rotor/Disc: Service and Repair
Brake Rotor - Removal and Installation
Front Brake Rotor
REMOVAL - BRAKE ROTOR (FRONT)
1. Remove disc brake caliper and store (hang) it out of the way.
2. Remove any clips retaining the brake rotor to the wheel mounting studs.
3. Remove brake rotor from hub by pulling it straight off wheel mounting studs.
INSTALLATION - BRAKE ROTOR (FRONT)
1. Install brake rotor over the wheel mounting studs onto hub.
2. Install disc brake caliper and shoes.
3. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal to adequately stop vehicle.
4. Check and adjust brake fluid level as necessary.
Rear Brake Rotor
REMOVAL - BRAKE ROTOR (REAR)
1. Remove disc brake caliper and store (hang) it out of the way.
2. Remove any clips retaining the brake rotor to the wheel mounting studs.
